You are responsible for shipping your carbs to me. You can ship the carbs using any shipping service.
I will bill you upon completion of the work and if any damaged components are discovered either you will
supply them or there will be an additional charge if I supply them. The most common damaged parts are broken fuel tubes and ripped vacuum diaphragms. Both are easy enough to examine yourself before you send
them so you don't have any surprises.
On checkout, use the Carb Service Payment Method, not PayPal or your credit card! You will receive an invoice for the service, shipping, and taxes if applicable, not including any additional parts or labor that may be needed as described in the previous paragraph. You will not be charged until the work is completed.
You need to fill out the form on the Carb Service Form page (link below), print it and include it with your carbs.
You will need to drain the fuel and wrap the carbs and attached aluminum plenum* in plastic. Pad them well to avoid shipping damage.
Bubble wrap or plastic peanuts work best but crushed newspaper is generally acceptable so long as it is packed in tight and at least 2" of material surrounds the carbs on all sides.
* The aluminum plenum the carb bodies attach to must be included. Do not detach or loosen the carbs from it as this will break the fuel tubes.
My address is -
Billy Carr
20706 State Highway 19
Canton, TX 75103-5751
Carb Service Form
|
